# math

From RPTools Wiki

(Redirected from math.ceil)

Jump to navigationJump to search## math() Function

•

**Introduced in version 1.4.0.5**This is NOT a single MapTool function but a collection of math functions in MapTool.

**Important Note**: Some of these functions have similar versions that don't have the `math.`

prefix. These functions may differ slightly from those in implementation and output. For instance, most of these functions return a floating-point number (e.g.: `3.0`

), so you may find it helpful to surround them with round(), floor(), or ceiling().

### Usage

```
Numbers:
[r:val = math.pi()]
[r:val = math.e()]
Trigonomotry:
[r:val = math.acos(degrees)]
[r:val = math.acos_r(radians)]
[r:val = math.asin(degrees)]
[r:val = math.asin_r(radians)]
[r:val = math.atan(degrees)]
[r:val = math.atan_r(radians)]
[r:val = math.atan2(degrees)]
[r:val = math.atan2_r(radians)]
[r:val = math.cos(degrees)]
[r:val = math.cos_r(num)]
[r:val = math.sin(degrees)]
[r:val = math.sin_r(num)]
[r:val = math.tan(degrees)]
[r:val = math.tan_r(num)]
[r:val = math.toDegrees(num)]
[r:val = math.toRadians(degrees)]
Power and root:
[r:val = math.sqrt(num)]
[r:val = math.squareroot(num)]
[r:val = math.cbrt(num)]
[r:val = math.cuberoot(num)]
[r:val = math.pow(num1,num2)]
Logarithmic
[r:val = math.log(num)] (this is the log to base e)
[r:val = math.log10(num)]
Pythagorean:
[r:val = math.hypot(num1, num2)]
[r:val = math.hypotenuse(num1, num2)]
Simple operations
[r:val = math.abs(num)]
[r:val = math.ceil(num)]
[r:val = math.floor(num)]
[r:val = math.isEven(num)]
[r:val = math.isInt(num)]
[r:val = math.isOdd(num)]
[r:val = math.max(num1, num2, num2, etc.)]
[r:val = math.min(num1, num2, num2, etc.)]
[r:val = math.mod(dividend, divisor)]
```

### Examples

#### abs

`[r:val = math.abs(-3)]`

Returns: 3.0

#### mod

Returns the result of the modulo operation between the two numbers, which represents the remainder after a division operation.

`[r: math.mod(14,6)]`

Returns 2

`[r: math.mod(10,5)]`

Returns 0

`[r: math.mod(-13,4)]`

Returns -1

#### pow

`[r:val = math.pow(2,3)]`