Difference between revisions of "User:LordSputnik/Proposals/Style/Recording"

From MusicBrainz Wiki
Line 61: Line 61:
  
 
===Number of Audio Channels===
 
===Number of Audio Channels===
It may be the case that similar mixes of a performance have different numbers of audio channels. The most common audio channel configuration is stereo. Stereo mixes will have two audio channels, intended to be played through two speakers (left and right). There are, however, a wide variety of audio channel configuration used in recordings. Mono mixes use only one channel, and were the de facto standard in pop music until the late 1960s. Quadraphonic and surround sound mixes can also be found on audio tracks.
+
It may be the case that very similar released tracks have different numbers of audio channels. The most common audio channel configuration is stereo (two channels; left and right). However, there are several common audio channel configurations used in recordings, including mono (one channel), quadraphonic (four channels) and surround sound (various multi-channel configurations).
  
These mixes should generally be distinguished by using separate recordings. An exception to this case is where a mix has been produced by ''downmixing'' the audio channels of another mix - for example, where a mono mix has been produced by combining the two channels of a stereo mix. Where a track features a downmix, the recording for the original mix should be on that track. A similar exception should be made where a mono channel has been electronically split into two stereo channels - for example, in [http://en.wikipedia.org/wiki/Duophonic Duophonic] recordings.
+
These different configurations should generally be distinguished by using separate Recordings. An exception to this case is where a released track has been produced by ''downmixing'' the audio channels of another Recording - for example, where a mono channel has been produced by combining two stereo channels. Where a track features a downmix, the multi-channel source Recording should be used on that track. A similar exception should be made where a mono channel has been electronically split into two stereo channels - for example, in [http://en.wikipedia.org/wiki/Duophonic Duophonic] recordings.
  
 
==Merging Recordings==
 
==Merging Recordings==

Revision as of 15:09, 14 April 2013


Status: This page describes an active style guideline proposal and is not official.



Proposal number: RFC-STYLE-208
Champion: LordSputnik
Current status: RFC
[Meeting#1 Meeting#2 Meeting#3 Mix/Master Meeting Initial Discussion]


JIRA ticket http://tickets.musicbrainz.org/browse/STYLE-208

Introduction

This proposal implements the changes to recordings discussed in the three recordings meetings held during January 2013. The meetings were open to all of the MusicBrainz community, and issues were discussed thoroughly, so any criticism of this proposal should hopefully be focused on the wording, and not the principles.

This proposal replaces the current Recording Style Guideline with the new revision in the section below.


Proposal

Recording Name

See the title guidelines for how to enter the recording's title.

Recording Artist

The recording artist should be the main artist involved in the creation of the recording. Usually, this will be the performer of the song, but it could also be the artist that remixed or recorded the recording.

Disambiguation Comment

A disambiguation comment should be used to identify distinguishing features of a recording where two or more recordings share the same name.

Live Recordings

In the specific case of live recordings, the naming format from live bootlegs should be used.

For example:

  1. Train in Vain (live, 1998-12-14: Telewest Arena, Newcastle, UK)
  2. Wake Up (live, Los Angeles, CA, USA)
  3. The Dance (live, 2002)
  4. Candle in the Wind (single edit) (live)

Using Recordings

A Recording is the result of mixing and/or editing one or more audio tracks. In many cases, a released track will be the original Recording produced from a performance. However, there are some important cases to consider where this is not true - these are discussed in the following section.

Different Performances

Different performances of the same work should always be given separate recordings, no matter how similar they may sound. This applies to both studio performances and live performances.

Different Recordings of the Same Performance

This section mostly applies to live bootleg recordings. Different audio recordings of the same performance will always result in different audio. A new MusicBrainz Recording should be created for each mix of a performance using different audio recordings.

Remixes

A group of audio tracks used in a Recording can be mixed and possibly edited in a different way. For example, the volume or tone of individual tracks may be altered, or effects may be applied to them. The result is often labelled on a track list as a remix, mix, dub or version, and should always be given a new Recording in MusicBrainz.

Edits

An existing Recording can itself be edited to produce a new Recording. For example, a "radio edit" or "single edit" may be produced by removing an intro or outro, verses, bridges or interludes to shorten the existing Recording, and/or by censoring some of the content.

Other examples include an edit using only a section of a Recording or an "extended edit" which repeats parts of an existing Recording to increase the duration.

An edit is a mix that has been restructured. This is different to a remix, because making an edit doesn't involve using the audio tracks of the old mix.

Where a fade is added to the first or last section of an existing Recording, this is not an edit, as the section is not removed.

Number of Audio Channels

It may be the case that very similar released tracks have different numbers of audio channels. The most common audio channel configuration is stereo (two channels; left and right). However, there are several common audio channel configurations used in recordings, including mono (one channel), quadraphonic (four channels) and surround sound (various multi-channel configurations).

These different configurations should generally be distinguished by using separate Recordings. An exception to this case is where a released track has been produced by downmixing the audio channels of another Recording - for example, where a mono channel has been produced by combining two stereo channels. Where a track features a downmix, the multi-channel source Recording should be used on that track. A similar exception should be made where a mono channel has been electronically split into two stereo channels - for example, in Duophonic recordings.

Merging Recordings

In addition to the above guidelines, it is extremely important to take the following into consideration when thinking of merging recordings.


Remastered tracks generally feature the original mix of a performance with different mastering applied. This means that they should mostly use the recording for the original mix. The exception to this is where a track labelled as a remaster is in fact a remix - in this case, follow the remix guidelines above.


Recordings with Different Durations

Recordings of different durations can be merged, as long as there is no evidence to suggest that a new mix has been created to change the lengths. Volume fades at the beginning or end of a song are considered mastering and not mixing, unless they cause the structure of the song to change.

For example, Recording A which slowly fades out on the last chorus of a performance can be considered the same as Recording B which has the last chorus at a constant volume. On the other hand, if Recording C of the same performance cut out before the chorus was heard, that would be considered a separate recording to Recording B.

Recordings with Conflicting Relationships

Generally, don't merge recordings if they have conflicting relationships. However, if you're certain that two recordings are the same and relationships are wrong, merge the recordings and correct the relationships.

Examples

  • There are four studio recordings of the song Don't Push by Sublime. These are four different mixes featuring different raw audio tracks. The recording Don't Push (original) appears on tracks which vary in length from 3:45 to 3:55 because they have been mastered at different speeds. Therefore, the pitch of the audio is different on these tracks, but because there is no difference in mixing they are considered the same recording. The recording Don't Push (album) appears on many releases at different levels of loudness, with differences in dynamic range and with different tonal qualities. However, again there is no evidence that this was the result of mixing and therefore these different tracks are one recording.